User manual

4. Dry the glass and white plastic parts with a chamois or a
cellulose sponge to prevent spotting.
5. Connect the power cable to an outlet, and then press the
power button to turn the product on.
Check the send-fax resolution setting
If the product was unable to send a fax because the receiving fax machine did not answer or was busy, the
product attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-
error options.
1. From the Home screen on the product control panel, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Open the Fax Resolution menu.
Check the error correction setting
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the
product detects an error during the transmission and the error-correction setting is On, the product can
request that the portion of the fax be resent. The factory-set default for error correction is On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you are
willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to
send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.
1. From the Home screen on the product control panel, touch the Setup
button.
2. Touch the Service menu.
3. Touch the Fax Service menu.
4. Touch the Error Correction button, and then touch the On button.
Send to a different fax machine
Send the fax job to a different fax machine to see if another machine will successfully receive the fax job.
ENWW Improve fax quality 195