Manual

2. Open the cartridge access door and wait for the print carriage to stop moving, which should take a few
seconds.
CAUTION: Do not replace or install cartridges when the print carriage is still moving.
3. Open the cartridge latch as shown and gently remove the cartridge from its slot.
4. Remove the protective lm from a new cartridge.
5. Insert the new cartridge into its slot at the same angle at which you removed the old cartridge, and then
close the latch as illustrated. Press the latch to make sure it is seated at on the cartridge.
NOTE: Install the color cartridge on the left and the black cartridge on the right.
6. Repeat steps 3 through 5 for the other cartridge if needed.
7. Close the cartridge access door.
8. Wait for the carriage to complete the cartridge initialization routine before using the printer.
NOTE: Do not open the cartridge access door until the cartridge initialization is complete
48 Chapter 6 Work with cartridges ENWW