Manual

To change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an
advanced user and want to use dierent settings (such as the IP address, subnet mask, or the default
gateway), you can change them manually.
TIP: Before setting a manual IP address, it is recommended to rst connect the printer to the network using
Automatic mode. This allows the router to congure the printer with other needed settings like subnet mask,
default gateway and DNS address.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the
installation, your network components cannot connect with the printer.
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, touch
( Setup ), and then touch Network Setup.
2. Touch Wireless Settings.
3. Touch Advanced Settings.
4. Touch IP Settings.
A message appears warning that changing the IP address removes the printer from the network. Touch
OK to continue.
5. To change the settings manually, touch Manual (Static), and then enter the appropriate information for
the following settings:
●
IP Address
●
Subnet Mask
●
Default Gateway
●
DNS Address
6. Enter your changes, and then select Apply.
Use Wi-Fi Direct
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable
device—without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
●
Make sure your computer or mobile device has the necessary software.
—
If you are using a computer, make sure you have installed the printer software provided with the
printer.
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct rst and
then install the printer software. Select Wireless when prompted by the printer software for a
connection type.
—
If you are using a mobile device, make sure you have installed a compatible printing app. For more
information about mobile printing, visit www.hp.com/go/mobileprinting.
●
Make sure Wi-Fi Direct for your printer is turned on.
●
Up to ve computers and mobile devices can use the same Wi-Fi Direct connection.
ENWW Use Wi-Fi Direct 53