Intel Rapid Start Technology (FFS) Guide Technical white paper

Enter timer duration

In order to set parameters for Rapid Start Technology, the following utilities must be installed:

 Intel’s Chipset utility

 Intel Rapid Storage Technology utility

 Intel Rapid Start Technology utility

Note: If you have just installed Intel Rapid Start Technology, make sure that you have restarted your

computer before proceeding with the following steps.

1. From the Start screen, type Intel, and then select Intel Rapid Start Technology.

2. Make sure the status of Intel Rapid Start Technology is set to On.

3. Use the slider to set the time duration for the computer to enter Rapid Start Technology

hibernation.

Note: The default time is 60 minutes (recommended).