Intel Rapid Start Technology (FFS) Guide Technical white paper

19
Creating the healthy hibernation partition
To prepare the healthy hibernation partition on the mSATA module:
1. From the Windows 7 desktop, click Start > All Programs > Accessories.
2. Next, right-click Command prompt, and then click Run as Administrator.
3. At the DOS prompt, type: DISKPART
4. Next, type List Disk.
5. Select the mSATA module by typing SELECT DISK x (where x is the number
associated with the mSATA module. For instance, if the mSATA module is Disk 1,
type SELECT DISK 1).
6. Next, type Create Partition Primary.
7. Then, type List Volume and select the volume corresponding to the partition that was
just created.
8. Finally, type: Set ID=84 OVERRIDE, type EXIT to exit the screen, and then restart the
computer.