Intel Rapid Start Technology (FFS) Guide Technical white paper

Enabling Rapid Start Technology in Windows 8
1. Ensure the computer is in RAID mode.
Note: For more information, see the System BIOS Configuration section.
2. Prepare the mSATA module by cleaning it of any data.
Note: Save any data if needed.
3. From the Start screen, type Command.
4. Right-click Command, and then select Run as Administrator.
5. At the DOS prompt, type: DISKPART
6. Next, type List Disk.
7. Select the mSATA module by typing SELECT DISK x (where x is the number associated with
the mSATA module. For instance, if the mSATA module is Disk 1, type SELECT DISK 1).
8. Type CLEAN, and then restart your computer.