Intel Rapid Start Technology (FFS) Guide Technical white paper

Preparing the mSATA module for the operating system reinstallation
To ensure that all data and partitions have been removed from the mSATA module, follow the steps
below.
1. Power off the computer.
2. Press the power button to start up the computer, and then press the ESC key to bring up the
Startup menu.
3. Next, select the F10 key to enter the BIOS Setup menu.
4. Next, use the arrows to move to or click to select the Security tab. Next, use the arrows to
move to Secure Erase, and then press Enter.