Intel Rapid Start Technology (FFS) Guide Technical white paper

Enter timer duration

In order to set parameters for Rapid Start Technology, the following utilities must be installed:

 Intel’s Chipset utility

 Intel Rapid Storage Technology utility

 Intel Rapid Start Technology utility

Note: If you have just installed Intel Rapid Start Technology, make sure that you have restarted your

computer before proceeding with the following steps.

1. From the desktop, click Start > All Programs > Intel.

2. Make sure the status of Intel Rapid Start Technology is On.

3. Use the slider to set the time duration for the computer to enter Rapid Start Technology

hibernation.

Note: The default time is 60 minutes (recommended).

4. Click the Save button, and then restart the computer in order to make sure these settings are

installed.