Datasheet

Part number
D7P94A4, D7P94A8, D7P94AS, D7P94AT
Panel type
IPS Gen 2, LED Backlit
Viewable image area
75,78 cm (29.83 in) widescreen; diagonally measured
Viewing angle
Horizontal: 178 degrees; Vertical: 178 degrees
Brightness
2
350 cd/m
2
Contrast ratio
2
Static: 1000:1; Dynamic: 5,000,000:1
Response rate
2
8 ms gray to gray
Frequency
Horizontal: 31 - 80 KHz (VGA) ; 24 - 98 KHz (DVI / DP / HDMI); Vertical: 60 - 70 Hz (VGA) ; 50 - 70 Hz (DVI / DP / HDMI)
Aspect ratio
16:10
Native resolution
2560 x 1600 @ 60 Hz
Resolutions supported
640 x 480 @ 60Hz, 720 x 400 @ 70 Hz, 800 x 600 @ 60 Hz, 1024 x 768 @ 60 Hz, 1280 x 720 @ 60 Hz, 1280 x 800 @ 60
Hz, 1280 x 1024 @ 60 Hz, 1366 x 768 @ 60 Hz, 1440 x 900 @ 60 Hz, 1600 x 900 @ 60 Hz, 1600 x 1200 @ 60 Hz, 1680 x
1050 @ 60 Hz, 1920 x 1080 @ 60 Hz, 1920 x 1200 @ 60 Hz, 2560 x 1440 @ 60 Hz, 2560 x 1600 @ 60 Hz
Input signal
DisplayPort 1.2 (1.1 compatible), DVI-D, HDMI 1.4, VGA (HDCP support on DVI-D, DisplayPort and HDMI)
USB
Integrated USB 3.0 hub with (1) Upstream and (4) Downstream ports
User controls
Menu, Minus ("-"), Plus ("+") /Input Control, OK/Auto, Power
Power consumption
ENERGY STAR
®
: 49.9 W; Default: 85 W; Maximum: 125 W; Sleep: 0.5W
Dimensions
(w x d x h)
Unpacked: 69,03 x 26,64 x 60,1 cm (27.18 x 10.49 x 23.66 in)
Head only: 69,03 x 6,63 x 44,98 cm (27.18 x 2.61 x 17.71 in)
Weight
Unpacked: 9,96 kg (21.96 lbs); Head only: 7,56 kg (16.67 lbs); Packaged: 13,73 kg (30.27 lbs)
Base features
Tilt: -5°to +20°; Swivel: 45°L to 45°R; Height Adjustable: 120 mm; Pivot Rotation: 90°
Environmental
Operating: 5° to 35° C (41° to 95° F); Non-operating: -20° to 60° C (-4° to 140° F)
Accessories
8
(sold separately)
HP Thin Client Mount Kit - Attach your HP Thin Client or USDT PC to the back of select HP Z Displays and maintain optimal ergonomic
adjustability with the HP Thin Client Mount Kit. Simply mount an HP Thin Client to the Kit’s VESA plate, slide it into place on the back of
an HP Z24i, Z27i or Z30i IPS Display stand, and you’re ready to go. Part number E5J35AA.
HP LCD Speaker Bar - Powered directly by the connected PC, seamlessly attaches to the monitor's bezel to bring full multimedia
support to select HP LCD monitors; features dual speakers with full sound range and two external jacks for headphones. Part number
NQ576AA.
HP Dual Output USB Graphics Adapter - Create a dual-monitor setup with the HP Dual Output USB Graphics Adapter – featuring both
DVI-I and DisplayPort inputs to drive displays at high resolutions through a single USB 3.0 connection to your PC. Part number
C5U89AA.
HP Business PC Security Lock Kit - Attaches to the rear of the PC with a six-foot steel cable that can be used to secure a PC or
peripherals such as mice, keyboards, monitors or USB security devices to protect them against unauthorized removal by physically
connecting the system to an anchor point. Part number PV606AA.
Certification and
compliance
CE, CB , CEL Grade 1, KC, KCC, NOM, PSB, ICE, TUV-S, CCC, CECP, SEPA, TCO 6.0 Certification, EPA, ISC, VCCI, FCC, HSMI,
Microsoft WHQL Certification (Windows 8 and Windows 7), ENERGY STAR® Qualified, EPEAT® Gold
4
.
Limited warranty
Protected by HP, including a 3 year standard limited warranty. Optional HP Care Pack Services
6
are extended service
contracts that extend your protection beyond the standard warranties.
6
1. Comparison is to IPS Gen 1 panels.
2. All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.
3. Options sold separately. Thin client sold separately. Thin client kit expected availability September 2013.
4. EPEAT® Gold registered models of this product are available where HP registers commercial display products. See www.epeat.net for registration status in your country.
5. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be Low Halogen.
6. Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date of hardware purchase. Restrictions and limitations
apply. See www.hp.com/go/cpc for details.
7. All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.
8. Each accessory and mounting hardware is sold separately.
9. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting surfaces vary widely and the final
mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you consult with a
qualified engineering, architectural or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application
and to ensure that your mounting solution is properly installed to support applied loads.
HP Z30i 30-inch IPS Display
© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein. ENERGY STAR is a registered mark owned by the U.S. government. July 2013