HP Compaq Business PC Maintenance and Service Guide Elite 8300 Series Convertible Minitower Elite 8300 Series Microtower Elite 8300 Series Small Form Factor Elite 8300 Series Ultra-Slim Desktop

13. To remove the rear antenna, from the inside of the front of the chassis, remove the antenna from
the plastic clips attached to the side of the chassis.
Figure 9-41 Removing the rear antenna – inside
14. From the outside of the rear of the chassis, remove the two Torx T8 screws that secure the
antenna to the chassis.
Figure 9-42 Removing the rear antenna – outside
246 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis