User manual

12
4. Pull-Printing to HP AC from an iOS Device
1) You must be a domain user on the domain where HP AC is installed (or have access to a user’s
username and password).
2) Connect the iOS device to the network via a wireless access point, or using a supported VPN.
3) Select a file to print.
4) Select the “hp-ac-…” in the list of printers.
5) Select Print.
6) You will be prompted to enter a user name and password.
7) Enter the username and password.
8) If your username and/or password are not valid, you will be re-prompted to enter them again.
9) If your username and password are valid, they will be saved on the iOS device forever, until the
device is reset. You will not ever need to enter them again.
10) Go to the HP AC enabled printer, and select “HP AC Secure Pull Print – Print your documents”. Enter
your username and password (or swipe your badge on the card reader if they have been setup on
the printer).
11) Select your job to print.
Note: You can also verify that the iOS printed to HP AC by using the “HP AC Configuration Utility” on
the HP AC server. Select the HPAC SPP Enterprise button, and you can view all the jobs available for
printing.