User manual

2. HP JetAdvantage Connect Print Server Setup

1. Run the Installer to perform the initial setup steps.

• Installer name:

HP_JAC_PrintServerInstall.exe

2. If needed, the installer will install the Bonjour discovery service from Apple. You must agree to

the Bonjour End User License Agreement in order to proceed.

3. When prompted, enter the following information:

• If you have a Server Certificate (in PFX format) for the Print Server, enter the path to the

certificate, and type in the password for the certificate.

• If you do not have a Server Certificate for the Print Server, select “Create Self-signed

certificate”, and enter a password for the certificate.

• Make the appropriate entries in the text entries for:

i. Client visible server name (this is what will be displayed to mobile users in their

print dialog)

ii. HPAC server name (this is the “fully qualified server name” where HP AC is

installed, as noted above)

iii. HPAC print queue name (this is the “shared print queue name” as noted above)

iv. HPAC printer port name (as noted above)

• Click “Continue”

4. When the Installer indicates “Installation Successfully Completed”, select “Close”.

The following is for informational purposes only:

After install, the following locations are used by the Print Server:

a. mDNS Service is installed at:

C:\Program Files (x86)\Hewlett-Packard\HpJetAdvantageConnect

b. IPP Handler is installed at:

C:\inetpub\wwwroot\HpJetAdvantageConnect

c. Configuration File is located at:

C:\ProgramData\Hewlett-Packard\Hp JetAdvantage Connect\conf

d. Log files:

i. Installer Log:

C:\Users\< user name >\AppData\Local\Temp

ii. mDNS Service & IPP Handler logs:

C:\ProgramData\Hewlett-Packard\Hp JetAdvantage Connect\logs

iii. IIS logs:

C:\inetpub\logs