User Guide

430
6–6
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 6–6 (seq: 116)
This is the black on page 6–6 (seq: 116)
2 Unscrew the cover plate at the back of the printer, and remove it.
Before handling a memory module, either put on a grounding wrist strap and
attach the end to the metal chassis of the printer, or touch the outer metal
surface of the printer with your hand. Otherwise, static electricity from your
body could damage the memory module.
3 There are two slots for SIMMs in the printer. The SIMM containing the upgrade
goes in the slot furthest from you. If both slots are free, skip this step and go
straight to step 5. If the slot nearest to you already contains a SIMM (a memory
module), then you must first remove it, in order to access the other slot.
a Gently push aside the two clips that hold the memory module in place.
Reconfiguring your printer
To upgrade the HP DesignJet 430 with color
Localization Note
CAUTION