User Guide

3–18
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 3–18 (seq: 88)
This is the black on page 3–18 (seq: 88)
Print quality recommendations
We advise that where possible you don’t use very large area fills with the following
media:
Opaque Bond
Translucent Bond
Vellum.
This can cause cockle.
In Glossy media use
Best to obtain good quality.
Cartridges almost empty of ink can cause some kind of banding in imaging
prints.
When printing renders or GIS files in
Best – Paper – Mono use the driver
setting
Ret=Off in case you get banding in the printout.
For printing imaging files on Coated media always use
Best quality, otherwise
you can get banding in the printout.
Localization Note.
Controlling your print’s appearance
Print quality recommendations