User Guide

4–2
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 4–2 (seq: 90)
This is the black on page 4–2 (seq: 90)
To cancel a print
To cancel the current print while it is being received, or while it is printing, press
Cancel.
The canceled print stays in memory until you send another, and so you can
subsequently use
Reprint to print it again. Note that, for these purposes, any
internal print (see chapter 5) counts as another print.
To copy a print
To print another copy of the last print, press Reprint.
It will be printed with the same settings for
Media Type and Print Quality as the
original copy, even if you’ve changed them on the front panel.
The following prevents
Reprint from working:
Another file has already been sent to the printer (including internal prints, for
example the Setup Sheet), or
You have switched the printer off and on again since first sending the print.
Localization Note.
X
CANCEL
Managing your prints
To cancel a print / To copy a print
REPRINT