- Hewlett-Packard Copier User Manual

load paper and originals

load originals and

paper

load originals

You can copy many types of originals onto different paper types, weights,

and sizes, including transparency film. It is important, however, that you

choose the right paper and make sure that it is loaded correctly and not

damaged.

There are two ways to load originals to your HP Digital Copier:

• Position the originals on the glass

• Feed originals into the ADF, if one is attached

load originals on

the glass

You can copy almost any type of original by placing it directly on the glass.

Lift the lid and place the original face down on the glass, positioning

it in the bottom-right corner with its sides touching the right and

bottom edges.

It is important to place the original the bottom-right corner.

Tip! If your original is printed on transparency film, place a

blank piece of paper on top of the transparency for better

quality.

Close the lid.

Many of the Special Features options, such as

Which Size? or Poster, will not work correctly if the

glass and lid backing are not clean. For more

information, see clean the glass and clean the lid

backing on page 35.

GwenRG.book Page 7 Thursday, January 31, 2002 5:20 PM