Quick Start Guide

www.hp.com/mobile/DJ2652A
*V1N01-90055*
*V1N01-90055*
V1N01-90055
© Copyright 2017 HP Development Company, L.P.
Printed in [English]
Printed in [French]
Printed in [Spanish]
EN FR ES
HP DeskJet 2600 All-in-One series
Scan to nd out more!
Standard data rates may apply. Might not be available in all languages.
The information contained herein
is subject to change without notice.
Need help? www.hp.com/support/dj2600
Scan: Use the HP mobile app or printer software to scan from your printer. You can also use Webscan in
the embedded web server (EWS). Find more information about scanning in the electronic Help or visit
www.hp.com/support/dj2600.
1
Power button: Turns the printer on or o.
2
Control panel display: Indicates number of copies, wireless status ( )
and signal strength ( ), Wi-Fi Direct status ( ), warnings or errors, and
estimated ink levels ( ).
3
Ink Alert light: Indicates low ink or cartridge problems.
4
Cancel button: Stops the current operation.
5
Resume button and light: This light blinks when a job is interrupted by a problem
(for example, out of paper or paper jam). After you have resolved the problem,
press this button to resume your previous job.
6
Wireless button and light: Press this button to turn the printer’s wireless
capability on or o. If the blue light is blinking, the wireless capability is on but
the printer is not yet connected to a wireless network. If the blue light stays on,
the printer is connected to a wireless network. If the light is o, the wireless
capability is o.
To turn Wi-Fi Direct on or o, press and hold the Wireless button and the Resume
button together for three seconds. The Wi-Fi Direct icon ( ) on the display is on
when Wi-Fi Direct is turned on.
To start Wi-Fi Protected Setup (WPS) mode, press and hold the Wireless button
for more than three seconds.
7
Information button: Prints a printer information page that provides a summary
of the printer information and its current status.
To print a wireless quick start guide, press and hold this button for three seconds.
Information light: If this light is blinking in white and the Wi-Fi Direct icon
(
) on the display is blinking fast at the same time, press the Information
button to conrm a connection.
8
Start Copy Color button: Starts a color copy job. To increase the number of color
copies, press this button multiple times quickly.
9
Start Copy Black button: Starts a black-and-white copy job. To increase the
number of black-and-white copies, press this button multiple times quickly.
English