Quick Start Guide

3
Share your printer with multiple devices on your network
After your printer has been connected to your wireless network, you can share your printer with multiple computers
and mobile devices on the same network. On each additional device, install the HP mobile app or printer software
from 123.hp.com and follow the onscreen instructions to connect to your printer.
Print from your smart phone or tablet
You can use the HP mobile app to set up and use your HP printer for scanning, printing, and sharing documents.
Install the app from 123.hp.com or from the app store for your mobile device.
You can also use your printer to print documents and photos directly from your mobile devices.
• iOS: Use the Print option from the Share menu. No setup required. iOS AirPrint is preinstalled.
• Android: Download and enable the HP Print Service Plugin (supported by most Android devices) from the Google
Play Store.
For help on enabling mobile printing, visit the HP Mobile Printing website at www.hp.com/go/mobileprinting. If
a local version of this website is not available in your country/region or language, you might be directed to the HP
Mobile Printing website in another country/region or language.
Wireless setup (continued)
If connecting your printer to your device through a wireless network was unsuccessful
1. Restore the network settings on your printer and try to connect again.
To restore the network settings, press and hold the Wireless button ( ) and the Cancel button ( ) for
three seconds. The Power button will blink for a few seconds.
2. If your router supports Wi-Fi Protected Setup (WPS) mode, try to connect through WPS mode.
To connect your printer through WPS mode with a router that has a WPS button:
a. Press and hold the Wireless button ( ) on your printer for more than 3 seconds to start WPS mode. The
Wireless light starts blinking.
b. Press the WPS button on your router. When the printer connects successfully, the Wireless light stops
blinking and stays on.
3. Make sure your printer is connected to the same network as your computer or mobile device.
To check the network to which your printer is currently connected:
a. Press the Wireless button ( ) and the Information button ( ) at the same time to print the wireless
network test report.
b. In the wireless network test report, under the CURRENT CONFIGURATION section, check Network Name
(SSID). This shows the name of the network to which your printer is connected.
4. Restart the components of the wireless network.
Sometimes, turning o the devices and then turning them back on helps resolve network communication issues.
Turn o the router, printer, and your computer or mobile device, and then turn them back on in this order: router
rst, then printer, and then your computer or mobile device.
Still have problems? Visit the HP Wireless Printing Center at www.hp.com/go/wirelessprinting.
If you are using a computer running Windows, you can use the Print and Scan Doctor tool, which can help solve
many problems you might have with the printer. To download this tool, visit www.hp.com/go/tools.
Use your printer wirelessly without a router
Use Wi-Fi Direct to print wirelessly without a router, from your computer, smartphone, or other wireless enabled
device. To use Wi-Fi Direct from a computer, the HP printer software must be installed on the computer.
English