Operation Manual

Cause Solution
The printer receives a single-page printing job, detects that
the paper length for the printing job does not match the
length of the loaded paper, and then prints out the page with
errors.
To clear the error, press any button on the control panel or
wait for two minutes.
To avoid the paper length mismatch problem, do one of the
following before printing.
●
Change the paper size setting for the printing job to
match the paper loaded.
●
Remove all paper from the input tray, and then load
paper that matches the paper size setting for the
printing job.
TIP: You can change the default paper size automatically
detected by the printer. For more information, see
Change the
default paper size detected by printer on page 20.
●
The Number of copies icon is alternating between the letter E and the number 2. At the same time, the
Error icon, the Paper Error icon, and the Resume light are blinking.
Cause Solution
The printer receives a multi-page printing job, detects that the
paper length for the printing job does not match the length of
the loaded paper, and then prints out the first page of the job
with errors.
●
To cancel the printing job, press the Cancel button
(
).
●
To continue printing the remaining pages, press the
Resume button (
). The remaining pages will have
the same errors as the first page.
TIP: You can change the default paper size automatically
detected by the printer. For more information, see
Change the
default paper size detected by printer on page 20.
●
The Number of copies icon is alternating between the letter E and the number 3. At the same time, the
Resume light and the Ink Alert light are blinking.
ENWW Control panel lights and display icons status 13