Getting Started Guide

2
Control Panel
1
Control panel display: Indicates number of copies, media errors, wireless status and signal strength,
Wi-Fi Direct status, and ink levels.
2
Cancel button: Stops the current operation.
3
Wireless button: Turns on or o the printer wireless capabilities.
Wireless light: Indicates whether the printer is connected to a wireless network or not. A blinking
light indicates that wireless has not been setup or that the printer is attempting to connect.
4
Wi-Fi Direct button: Turns on or o Wi-Fi Direct.
Wi-Fi Direct light: Indicates the on or o status of Wi-Fi Direct. A blinking light indicates that the
printer is connecting to a mobile device in the Wi-Fi Protected Setup (WPS) push mode or there is a
problem of the Wi-Fi Direct connection.
5
Start Copy Color button: Starts a color copy job. To increase the number of color copies, press the
button multiple times. Copying will start two seconds after the last button press.
6
Power button: Turns the printer on or o.
7
Ink Alert light: Indicates low ink or ink cartridge problems.
8
Resume button: Resumes a job after a disruption (for example, after loading paper or clearing a
paper jam).
Resume light: Indicates that you can press the Resume button to assist in solving a problem.
9
Information button: Prints out a printer information page. Press the button in combination with the
Wireless button, the Wi-Fi Direct button, or the HP ePrint button to get more specic help pages
tied to each of those buttons.
Information light: Indicates that you can press the Information button to get help for a warning or
error.
10
HP ePrint button: Turns HP ePrint on or o.
HP ePrint light: Indicates the on or o status of HP ePrint. A blinking light indicates a problem with
the connection to Web Services.
11
Start Copy Black button: Starts a black-and-white copy job. To increase the number of black-and-
white copies, press the button multiple times. Copying will start two seconds after the last button
press.
English