Troubleshooting guide

Error messages 155
1741-Fixed Disk 1 failed Set Block Mode
Audible Beeps: None
Possible Cause: Fixed drive error detected.
Action: Run the server setup utility and correct the configuration.
1743-Slot X Drive Array - Logical Drive Erase Operation in Progress...
...Logical drives being erased are temporarily offline.
Audible Beeps: None
Possible Cause: The drives being erased are offline.
Action: Do one of the following:
• Wait for the erase process to complete before using the logical drive.
• Abort the erase process using ACU.
1743-Slot X Drive Array - Logical Drive Erase Operation(s) are Queued...
...Logical drives will temporarily go offline while being erased.
Audible Beeps: None
Possible Cause: The drives being erased are offline.
Action: Do one of the following:
• Wait for the erase process to complete before using the logical drive.
• Abort the erase process using ACU.
1744-Slot X Drive Array - Drive Erase Operation In Progress (or Queued)...
...The following disk drive(s) will be blank upon completion: (followed by a list of drives)
Audible Beeps: None
Possible Cause: A drive erase operation was previously initiated by the user and is in progress or is
scheduled for all drives in the list.
Action: None required
1745-Slot X Drive Array - Drive Erase Operation Completed...
...The following disk drive(s) have been erased and will remain offline until hot-replaced or re-enabled by the Array
Configuration Utility:
(followed by a list of drives)
Audible Beeps: None
Possible Cause: The drive erase operation was successfully completed, and the drives are being held in an
offline state to ensure that the drives remain blank until re-enabled by the user.
Action: Replace each drive in the list or re-enable each drive in the list using one of the following methods:
• Use the Array Configuration Utility (all drive types).
• Perform hot-plug removal and reinstallation (hot-plug hard drives only).