Troubleshooting guide

Introduction 9
• Updated Option ROM Configuration for Arrays (on page 71)
• Updated Automatic Server Recovery (on page 72)
• Updated the following section in HP Smart Update Manager deployment (on page 82):
o Online deployment ("Online deployment (if SPP is not supported)" on page 83)
• Added or updated multiple messages in Error messages (on page 91)
o ADU version 8.0 through 8.28 error messages (on page 111)
o POST error messages and beep codes (on page 121):
— Non-numeric messages or beeps only (on page 121)
— 200 series (on page 135)
— 1700 series (on page 146)
— 1800 series (on page 171)
• Updated Linux operating systems (on page 187)
• Updated Oracle Solaris operating systems
375445-402 (April 2011)
The eleventh edition of the HP ProLiant Servers Troubleshooting Guide, part number 375445-402, included
the following additions and updates:
• Updated the HP ProLiant 100 Series Server troubleshooting information (on page 11) section to provide
troubleshooting information for the HP ProLiant ML110 G7 Server and HP ProLiant DL120 G7 Server.
• Updated the following sections to include the HP Smart Update Firmware DVD:
o Firmware updates (on page 18)
o HP Smart Update Manager deployment (on page 82)
o ROM Update Utility
375445-401 (January 2011)
The tenth edition of the HP ProLiant Servers Troubleshooting Guide, part number 375445-401, included the
following additions and updates:
• Added a new section to Getting started:
Performing processor procedures in the troubleshooting process (on page 16)
• Updated Breaking the server down to the minimum hardware configuration (on page 16).
• Updated the introduction and sections in Hardware problems (on page 37):
o Unknown problem (on page 40)
o Processor problems (on page 51)
• Updated multiple messages in Error messages (on page 91):
o POST error messages and beep codes (on page 121)
o Event List Error Messages (on page 171)
o Port 85 codes and iLO messages (on page 179)
o Windows® Event Log processor error codes (on page 183)