HP ProLiant Lights-Out 100 Remote Management User Guide For HP ProLiant ML110 G5, ML115 G5, DL120 G5, ML150 G5, DL160 G5, DL165 G5, DL180 G5, DL185 G5, and SL165z G6 Servers Part Number 467996-007 December 2009 (Seventh Edition)
© Copyright 2007, 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software.
Contents Operational overview ................................................................................................................... 5 Overview .................................................................................................................................................... 5 New features ............................................................................................................................................... 5 Server management............................
Controlling server power from a browser ............................................................................................ 28 Controlling server power through the CLP ........................................................................................... 29 Monitoring sensors ..................................................................................................................................... 29 Viewing sensors data from a web browser ............................................
Operational overview Overview This guide explains the standard and optional operational features of the Lights-Out 100 available for the following HP ProLiant server models: • ML110 G5 server • ML115 G5 server • DL120 G5 server • ML150 G5 server • DL160 G5 server • DL165 G5 server • DL180 G5 server • DL185 G5 server • SL165z G6 server New features This release of LO100 adds support for HP ProLiant SL165z G6 Server.
• Remotely control the power button of the server (power on and off the server), or perform warm or cold server reboots • Remotely monitor fan speed and system power state (S0 or S5) • Access the system event log • Access virtual media • Configure TCP/IP settings for the LO100 NIC • Control user access • Discover, identify, and launch LO100 from HP SIM • Access LO100 and server controls using a standard browser or new industry-standard SMASH CLP command line interface • Access command line
• • The Lights-Out 100i Select Pack includes: o Support for SSL, SSH, and IPMI 2.
Installation of the HP Lights-Out 100c Remote Management Card Remote management card kit contents For HP ProLiant ML110 G5, ML115 G5, DL120 G5, ML150 G5, and DL180 G5 servers, you must install the HP Lights-Out 100c Remote Management Card to activate the LO100 optional features. For more information, see "LO100 optional features (on page 6).
Installing the remote management card 1. Remove the access panel. 2. Carefully lay the server on its unexposed side to gain access to the system board. 3. Locate the remote management card connectors on the system board. 4. Install the remote management card in the connectors on the system board. Post-installation procedures 1. Be sure all components are installed according to the installation procedures. 2. Be sure you have not left any loose tools or parts inside the server. 3.
Configuration Configuring network access Through your server network connection, you can access the remote management CLP, verify POS remotely, access the server through a web browser, and access the BIOS Setup Utility remotely. To configure network access: 1. 2. Connect a standard Ethernet cable from the LO100 to a network jack using one of the following options: o On ProLiant ML110 G5, ML115 G5, DL120 G5, ML150 G5, and DL180 G5 servers, connect to the NIC port on the remote management card.
Accessing BIOS Setup Utility and using function keys Throughout the document, the F10 key is listed as the standard method of accessing the BIOS Setup Utility, saving changes, and exiting the utility. In some cases, the function keys (F keys) might not pass through the telnet client correctly to the remote system.
5. Press the F10 key to save and exit. Configuring LO100 serial port 1. Power on the server by pressing the Power On/Off button on the front panel. 2. When POST displays the message, ROM-Based Setup, press the F10 key. If the server has an administrator password configured, the system prompts you to enter the password. If the server does not have a password configured, the main screen of the BIOS Setup Utility appears. 3. Press the right arrow (→) key to navigate to the Advanced menu. 4.
o On ML115 G5 servers: i. Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key. ii. Scroll to the BMC LAN Configuration menu by pressing the down arrow (↓) key. iii. Press the Enter key. iv. Set Share NIC Mode to Enabled. o On DL160 G5, DL165 G5, and DL185 G5 servers: i. Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key. ii. Scroll to the LAN Configuration menu by pressing the down arrow (↓) key. iii. Press the Enter key. iv.
ii. Press the down arrow (↓) key to scroll to the end of the menu to display the DHCP IP address. iii. Note the DHCP assigned IP address for future reference. o On DL160 G5, DL165 G5, DL180 G5, and DL185 G5 servers: i. Press the down arrow (↓) key to scroll to the LAN Configuration menu. Press the Enter key. ii. Note the DHCP assigned IP address for future reference. o On SL165z G6 servers: i. Press the down arrow (↓) key to scroll to the IPMI Configuration menu. Press the Enter key. ii.
ii. On DHCP IP Source, select Disabled. iii. Press the down arrow (↓) key to scroll down and enter a valid IP address, subnet mask, and gateway address (press the Tab key to move between address fields). o On ML115 G5 servers: i. Press the down arrow (↓) key to scroll to the BMC LAN Configuration menu. Press the Enter key. ii. Press the down arrow (↓) key to scroll to the end, and then select DHCP IP Source. iii. On DHCP IP Source, select Disabled. iv.
2. Set the following: o BMC HTTP Service—Enabled o BMC HTTPS Service—Enabled o BMC Telnet Service—Enabled On ML150 G5 and DL180 G5 servers: 1. Select Advanced>IPMI. 2. Set the following: o BMC HTTP Service—Enabled o BMC Telnet Service—Enabled TCP and UDP port numbers used by LO100 The following table lists the TCP and UDP port numbers used by the various LO100 network-accessible features. You can use this information to configure networking infrastructure or security settings.
Firmware Upgrade Diskette Utility, which is available for download from the HP website (http://www.hp.com/servers/lights-out). To create an uncompressed image file, enter the following command at the DOS prompt: ROMPAQ /D where is the ROMPAQ firmware image file and is the file name for the uncompressed binary image file. For example: ROMPAQ /D cpqq0801.D14 ldrImage.bin ROMPAQ Firmware Upgrade Utility, Version 5.
o is the URL or IP address of the TFTP server containing the firmware. o is the path of the file relative to the TFTP server root. o is the file name of the image file (in this example, LdrImage.bin). For example, enter load -source //10.141.38.157/LdrImage.bin -oemhpfiletype csr. For Linux CLP load command firmware updates, you must place the image file in the tftpboot folder, which is located in the TFTP servers root directory.
Using LO100 Using SSL SSL is a protocol used to transmit private documents through the Internet and uses a private key or certificate to encrypt data transferred over the SSL connection. The Lights-Out 100 provides security for remote management in distributed IT environments by using an industry-standard encryption protocol for data traveling on unsecured networks.
NOTE: Logging in to an SSH session could take up to 90 seconds. Depending on the client used, you might not see on-screen activity during this time. To access the remote management processor using SSH: 1. Open an SSH window. 2. When prompted, enter the IP address, login name, and password. Using the PuTTY utility PuTTY 0.54 is a terminal emulation product that includes support for telnet and the SSH protocol. PuTTY 0.54 is available for download from the Internet.
LO100 CLP supports two simultaneous SSH connections, two SSH connections and one telnet connection, or one SSH connection and two telnet connections. You cannot have more than two simultaneous SSH connections and up to three (telnet and SSH) connections at a time.
Base commands • The help command displays context-sensitive help. Entering help displays all the supported commands. Entering displays the help message specific to that command. o Help for verbs Calling help for a verb returns the general syntax and usage associated with issuing that verb. Calling help for a verb that is not present in the current directory returns an Unsupported Command message. The following examples are all valid ways to call help for a verb. — /.
name=Hewlett-Packard enabledstate=enabled Verbs cd version exit show reset start stop help /./system1/-> help name Unsupported Command /./system1/-> help enabledstate Unsupported Command /./system1/-> help properties Unsupported Command /./system1/-> name -h Invalid command /./system1/-> • The exit command terminates the CLP session. • The cd command sets the current default target. The context works similar to a directory path.
cd version exit show help The first line of information returned by the show command is the current context. In the example, /. is the current context. Following the context is a list of subtargets (Targets) and properties (Properties) applicable to the current context. The verbs section (Verbs) shows which commands are available in this context. The show command can also be specified with an explicit or implicit context and a specific property.
load -source //192.168.2.1/pub/firmwareimage.bin -oemhpfiletype csr //192.168.2.1/pub/firmwareimage.bin transferred to /map1/firmware/firmwareimage • The reset command causes a target to cycle from enabled to disabled and then to enabled again. • The set command assigns a specific value to a property or group of properties. The standard syntax for the set command is set property=new value. The set command is used to change any changeable property.
IPMI 2.0 support LO100 supports the industry-standard IPMI 2.0. The IPMI specification defines standardized, abstracted interfaces that can be used for monitoring and control functions that are built in to the platform hardware. In addition to supporting the mandatory commands for IPMI 2.0, the following additional IPMI 2.0 features are supported by LO100: • • • • • Additional IPMI 2.
Logging in through the CLP 1. Establish a connection to the remote management processor by launching a telnet session or an SSH session. 2. Enter the user name at the login prompt. The default user name for the Administrator account is admin. The default user name for the Operator account is Operator. 3. Enter the password at the password prompt. The default password for the Administrator account is admin. The default password for the Operator account is Operator. 4.
Option Description User Administration Accesses the user configuration screen. Network Settings Accesses the network parameter settings screen. IPMI PET Configuration Accesses the PET destinations and alert policy table. Application License Key Displays the licensing screen. Security Settings Accesses LO100 security, personal certificate and key installation options. Firmware Download Enables you to flash firmware through the web browser.
To modify Chassis Actions, select a Power Control Option in the Chassis Actions section, and then click Apply. To identify the server in the rack and illuminate the UID (the LED on the front panel of the server), from the UID list, select the length of time for the UID to illuminate, and then click Identify. NOTE: The UID is not available on all LO100 servers. For more information, see your server user guide. A restore policy controls how the system responds when power is connected to the server.
Viewing sensors data from a web browser The Monitoring Sensors screen displays a snapshot of the temperature, fans, and voltage sensor data, including sensor type, name, status, and current reading. To access this page from a web browser, on the main menu navigation bar, click Monitoring Sensor. To update the display, click the Refresh button. To view or add a PEF action, click PEF. For more information, see "Platform Event Filtering configuration (on page 31).
o On SL165z G6 servers: i. Press the down arrow (↓) key to scroll to IPMI. Press the Enter key. ii. Scroll to the Hardware Health Information menu by pressing the down arrow (↓) key, and then scroll to the ambient Sensor Health Information menu. Press the Enter key. The Loading data. Please wait message appears. After this message disappears, the Temperature and Voltage sensor data appears. This data is real-time data and is updated on a periodic basis.
• Event Offsets—Displays trip points (movements across thresholds) that define what type of sensor event triggers an action. The information in the Events Offsets section varies with the type of sensor. Not all options are available for all sensors. You can select any of the available options. • PEF Action—Displays the same information for all sensors: o Sensor Type—Displays the type of sensor selected. o Sensor Name—Displays the name of the sensor.
To set a policy: 1. Select the Policy Enable state. 2. Enter the Policy Number and Destination Selector information. 3. o Policy Enable—Enables you to selectively enable and disable trap forwarding. o Policy Number—Enables you to select a policy that will be used in PEF configuration. o Destination Selector—Specifies where to send the PET trap from the destinations defined in the PET Destinations section. Click Apply.
Before using the mouse in LO100 remote graphic console, HP recommends synchronizing your local mouse pointer and the remote mouse pointer. For more information, see "Mouse synchronization (on page 36)." Using the remote graphic console The Remote KVM/Media Viewer displays a virtual desktop and provides full control over the display, keyboard, and mouse of the host server.
• Take Full Control—Enables you to take control of the remote console if you are currently in view-only mode. Only one remote console user can control the remote console at a time. Clicking Take Full Control displays a dialog box that prompts you to click OK to take full control of the system or click Cancel to access the system in a view-only mode. • Disconnect Session—Disconnects the selected user session. • Relinquish Full Control—Releases control of the session and remains in a view-only status.
To record all log messages to the console from the Logging list, select Console. To check log messages in the Java™ console window, from the list on the Tools menu of Internet Explorer menu bar, select Sun Java Console. To record all log messages to a file, select Log File from the Logging list, enabling the Console Log File textbox. To select a file in which log messages will be stored, click the Browse button, or enter the fully qualified file name of the selected file in the textbox.
d. Set the acceleration parameters. For example: xset m 1/1 1 • For Red Hat Enterprise Linux, set the acceleration parameters using: xset m 1/1 1 Using the system event log LO100 captures and stores the IPMI event log for access through a browser, CLP, BIOS Setup Utility, and RBSU even when the server is not operational. The system event log displays a short description of each system event. Recorded events include abnormal temperature, fan events, system resets, and system power loss.
number=1 date=05/07/2008 time=16:42:52 sensordescription=Identify eventdescription=State Asserted eventdirection=Assertion Verbs cd version exit show reset oemhp help Accessing the system event log from the BIOS Setup Utility 1. Press the F10 key during POST to enter the BIOS Setup Utility. 2. Press the right arrow (→) key to navigate to the Advanced menu. 3. Press the down arrow (↓) key to scroll to IPMI. Press the Enter key. 4.
System buttons On the virtual keyboard, there are eight different system buttons: LCtrl, LWin, LAlt, RAlt, RWin, RCtrl, Context, and [Lock]. These buttons can be used as virtual keys and are similar to the keys the physical keyboard of your local machine. For example, when you press the Ctrl+Alt+Del keys on the physical keyboard, the Task Manager of your local machine appears in addition to the task manager on the server, or the key combination unlocks the server for login.
Adding a virtual media device The LO100 virtual media option provides you with a virtual media drive, which can direct a remote host server to boot and use standard media from anywhere on the network. Virtual media devices are available while the host system boots. To add a new virtual media device, click Add on the Virtual Media page. The Add Virtual Media window appears. This window has the following options: • The Look In list enables you to change your directory or drive.
To share a virtual media device, do the following: 1. On the Virtual KVM menu, from the Control menu, select Virtual Media. The Virtual Media window appears. 2. If the device you want to add is not in the list, click Remove. 3. To add a device, see "Adding a virtual media device (on page 40)". 4. Select the device and click Connect. A message box appears, indicating either the device has been successfully connected or a problem has occurred. 5. Click OK to close the Virtual Media window.
Redirecting BIOS console text through telnet LO100 BIOS console text redirection enables you to view the entire boot process remotely and make changes in the BIOS Setup Utility from a remote computer. This utility helps you troubleshoot and manage servers remotely. To configure the BIOS Setup Utility on the target system: 1. Press the F10 key during POST to enter the BIOS Setup Utility. 2. Press the right arrow (→) key to navigate to the Advanced menu. 3.
o On ML150 G5 servers: i. Press the down arrow (↓) key to scroll down to the Console Redirection option, and press the Enter key. ii. Verify the following settings: — Console Redirection—Enabled — Baud Rate—115.2K — Terminal Type—VT100+ — Flow Control—None — Redirection after BIOS POST—On o On DL160 G5 servers: i. Press the down arrow (↓) key to scroll down to the Remote Access Configuration option, and press the Enter key. ii.
— Remote Access—Enabled — EMS support(SPCR)—Enabled — Base Address—IRQ4/3F8 — Serial Port Mode—9600 8,n,1 — Flow Control—None — Terminal Type—VT100 — Redirection after BIOS POST—Enabled 4. Press the Esc key to return to the previous screen. 5. Scroll to the I/O Device Configuration option, and press the Enter key. 6. Verify that Serial Port is set to Shared. 7. Follow the instructions in the "Network settings (on page 51)" section to set or obtain a valid IP address. 8.
— Terminal Type—VT100 — Sredir Memory Display Delay—No Delay I/O Device Configuration—Configure IO Port — Serial Port 1 Address—3F8/IRQ4 o On HP ProLiant ML115 G5, ProLiant DL165 G5, and ProLiant DL185 G5 servers, verify the following settings: Configure Console Redirection — Console Redirection—Enabled — EMS Support (SPCR)—Enabled — Flow Control—None — Redirection After BIOS POST—Always — Terminal Type—VT100 — Sredir Memory Display Delay—No Delay I/O Device Configuration-Configure IO Port — Serial Port
Remote Access Configuration — Remote Access—Enabled — EMS support(SPCR)—Enabled o On HP ProLiant DL180 G5 and SL165z G6 servers, verify the following settings: Remote Access Configuration — Remote Access—Enabled — EMS support(SPCR)—Enabled — Terminal Type—VT100 — Flow Control—None — Redirection after BIOS POST—Always SuperIO Configuration — Serial Port Address—3F8 — Serial Port IRQ—IRQ 4 2. In the /boot/grub/menu.
ii. Verify the following settings: — Console Redirection—Enabled — Baud Rate—115.2K — Terminal Type—VT100+ — Flow Control—None — Redirection after BIOS POST—On o On ML115 G5, DL165 G5, and DL185 G5 servers: i. o Press the down arrow (↓) key to scroll down to the Console Redirection option, and then press the Enter key.
i. Press the down arrow (↓) key to scroll down to the Remote Access Configuration option, and then press the Enter key. ii. Verify the following settings: — Remote Access—Enabled — EMS support(SPCR)—Enabled o On ML180 G5 servers: i. Press the down arrow (↓) key to scroll down to the Remote Access Configuration option, and then press the Enter key. ii.
Hardware Inventory page The Hardware Inventory page enables you to remotely identify the presence of processors on a target server. To access this page from a web browser on the main menu navigation bar, click Hardware Inventory. User administration The User Administration option on the main menu navigation bar enables you (if authorized) to edit the user name and password for existing users. You cannot create a new user.
Option User Operator Virtual KVM No No Application License Key No No Security Settings No No Changing user settings through a web browser The User Administration screen enables you to view user information, modify user settings, and enable or disable user accounts. The first user account is a fixed null value. You cannot change the properties of the first user or use it to log in. Only the first two users (after the fixed null value) are enabled for login by default.
1. Log in to the CLP as described in the "Logging in to LO100 (on page 26)" section. 2. At the command prompt, enter cd map1/accounts. 3. Select a user by entering cd user1 or cd user#, where # is the user you want to modify and a whole number between 2 and 16. 4. To change the user name, enter set username=. For example: /./map1/accounts/user2/> set username=testuser2 5. To change the user password, enter set password=, and enter the new password when prompted.
Configuring network settings using a web browser The Network Settings screen displays IP address, subnet mask, and other TCP/IP-related settings. From the Network Settings screen, you can enable or disable DHCP and configure a static IP address for servers not using DHCP. You can view and modify the network settings when logged in as either OEM or administrator (admin).
• DNS Current Domain NameDisplays the current name of the domain where the LO100 subsystem resides. DHCP assigns this name. This name would be what is currently registered, whether it was returned through option 6, or it was configured locally as al default. • DNS Configured Domain NameDisplays the domain name set by user as default domain name. • Register this Connection's Addresses in DNSEnables you to register these server addresses to the DNS Server on the network.
2. Press the right arrow (→) key to navigate to the Advanced menu. 3. Press the down arrow (↓) key to scroll to IPMI. Press the Enter key. 4. To set your network BIOS settings, choose one of these options: o On ML110 G5 and ML150 G5 servers: i. Press the down arrow (↓) key to scroll to the end, and then select DHCP IP Source. ii. On DHCP IP Source, select Disabled. iii.
o On DL120 G5 servers, set IP Address Assignment to DHCP. o On DL160 G5, DL165 G5, DL180 G5, and DL185 G5 servers: i. Scroll to the LAN Configuration menu by pressing the down arrow (↓) key. Press the Enter key. ii. Set DHCP IP Source to Enabled. 5. To save and exit, press the F10 key, or to view the new IP Address, allow the server to reset and reenter the BIOS Setup Utility. To enable telnet and HTTP services: On DL160 G5, DL165 G5, and DL185 G5 servers, HTTP and telnet are enabled by default.
2. To display the license activation screen, click Application License Key. If the Application License Key option is not available, you must update the LO100 firmware. For more information, see "Updating the firmware (on page 16)." 3. Enter the license key in the spaces provided. To move between fields, click inside a field or press the Tab key. The Activation License Key field advances automatically as you enter data. 4. Click Apply.
Productions website (http://www.slproweb.com/products/Win32OpenSSL.html), and the commands issued in a DOS window to generate the certificate. To generate a certificate using Win32 OpenSSL: 1. Download Win32 OpenSSL. 2. Install and set up OpenSSL. 3. Using OpenSSL, generate a DSA parameters file: openssl dsaparam -out server_dsaparam.pem 1024 4. Generate the DSA private key file, called server_privkey.pem: openssl gendsa -out server_privkey.pem server_dsaparam.pem 5.
5. In the File Name field, enter the file name of the certificate created (server_cacert.pem). Include the path relative to the TFTP server root in the file name. 6. Click Apply. To install the private key through the browser: 1. Log in to LO100 as an administrator. 2. On the browser main menu navigation bar, click Security Settings. 3. In the TFTP server IP address field, enter the IP address of the TFTP server. 4. On the menu under File type, select Key. 5.
Installing firmware through a web browser The Firmware Download page enables you to install new firmware images. To install firmware through the browser: 1. Log in to LO100 as an administrator. 2. On the browser main menu recognition box, click Firmware Download. 3. In the TFTP server IP address field, enter the IP address of the TFTP server. 4. Enter the file name of the firmware image in the File Name field. Include the path relative to the TFTP server root in the file name. 5.
Linux telnet client. Likewise, if you are running a Windows® CMS, run Windows on your workstations, and use a Windows® Telnet client. If you run multiple operating systems in your environment, an application limitation issue might occur. For example, running Linux on your servers and using a Windows® Telnet client or PuTTY might cause an end of line character issue.
• • • o DOS: ipmitool 20 c0 29 01 00 00 02 00 08 o Linux: ipmitool raw 0x30 0x29 0x01 0x00 0x00 0x02 0x00 0x08 To set telnet outbound to 0x03: o CLP: oemhp I 20 c0 20 18 00 29 01 00 00 02 01 03 b8 o DOS: ipmitool 20 c0 29 01 00 00 02 01 03 o Linux: ipmitool raw 0x30 0x29 0x01 0x00 0x00 0x02 0x01 0x03 To set SSH inbound to 0x08: o CLP: oemhp I 20 c0 20 18 00 29 01 00 01 02 00 08 b3 o DOS: ipmitool 20 c0 29 01 00 01 02 00 08 o Linux: ipmitool raw 0x30 0x29 0x01 0x00 0x01 0x02 0x00 0x08 To s
Technical support Software technical support and update service With LO100i firmware version 3.0, HP LO100i Advanced Packs and HP LO100i Select Packs are available with new licenses that provide for optional future upgrades. For more information about these options, see the HP website (http://www.hp.com/servers/lights-out). A license entitlement certificate is delivered in place of a license activation key.
• Third-party hardware or software • Operating system type and revision level Technical support 63
Acronyms and abbreviations BIOS Basic Input/Output System BMC baseboard management controller CLI Command Line Interface CLP command line protocol CMS central management server CR carriage return DHCP Dynamic Host Configuration Protocol DSA Digital Signature Algorithm EMS Emergency Management Services HTTP hypertext transfer protocol IP Internet Protocol IPMI Intelligent Platform Management Interface Acronyms and abbreviations 64
JVM Java Virtual Machine KVM keyboard, video, and mouse LO100 HP Lights-Out 100 Remote Management processors MAC Media Access Control NIC network interface card OS operating system PEF Platform Event Filtering PEM Privacy Enhanced Mail PET Platform Event Trap POST Power-On Self Test RBSU ROM-Based Setup Utility SLES SUSE Linux Enterprise Server SMASH System Management Architecture for Server Hardware SSH Secure Shell Acronyms and abbreviations 65
SSL Secure Sockets Layer TCP/IP Transmission Control Protocol/Internet Protocol TFTP Trivial File Transfer Protocol UID unit identification URL uniform resource locator VNC virtual network computing Acronyms and abbreviations 66
Index A accessing software, browser 11, 26 administration 10 alert messages 32 authorized reseller 62 B base management controller (BMC) 10, 13, 16, 38, 44, 53 BIOS configuration 11, 12, 13, 14 BIOS console, text redirection 42 BIOS Setup Utility 11, 13, 14, 16, 29, 38, 42, 44, 46 BIOS upgrade 16, 59 BMC (base management controller) 10, 13, 16, 38, 44, 53 browser-based setup 52 C certificates 56, 57, 58 CLP (Command Line Protocol) 33, 37, 50, 51, 53, 58 CLP overview 20 CLP, commands 22, 25, 29, CLP, conne
Intelligent Platform Management Interface (IPMI) 5, 26, 32, 33, 37 IP (Internet Protocol) 13, 14, 27, 53 IP address assignment 14 IPMI (Intelligent Platform Management Interface) 5, 26, 32, 33, 37 IPMI support 26 K key, private 57, 58 keyboard, video, mouse (KVM) 5, 35, 49 keys, system 39 kit contents, LO100c management card 8 KVM, (keyboard, video, mouse) 5, 35, 49 L Lights-Out 100c Remote Management Card 8 Linux procedures 44 Linux, console redirection 44 LO100, logging in through browser 26 logging in
SSH keys, importing 56, 57 SSH utility 19 SSL, (Secure Sockets Layer) 5, 6, 19, 56, 57 SSL, importing key and certificate 56 SSL, overview 19 SSL, using 19 static IP addresses 14 storage devices, adding 40 storage devices, sharing 40 storage devices, using 39 support, HP Systems Insight Manager 59 support, IPMI 26 SUSE Linux Enterprise Server (SLES) 36 system buttons 39 system event log, access through the BIOS 38 system event log, access through the CLP 37 system event logs 37 System Management Architectur
