QuickSpecs

HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that
the HP Power Advisor is run to determine the right size power supply for your
server configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor .
NOTE: Three additional power supply units are required for full redundancy.
NOTE: If you require a local power cord, please check the Power
Specifications below for the appropriate country-specific power cord, or consult
the Power Cord Matrix: http://www.hp.com/go/powercordmatrix .
HP 1200W 12V Hot plug AC Power Supply 437572-B21
NOTE: Three additional power supply units are required for full redundancy.
NOTE: If you require a local power cord, please check the Power
Specifications below for the appropriate country-specific power cord, or consult
the Power Cord Matrix: http://www.hp.com/go/powercordmatrix .
Power Options
HP High Power Graphics Card Cable Option
NOTE: High Line Voltage is required with this kit. Using Low Line Voltage will
halt the system. However if the total power usage is validated using the power
calculator, the system halt condition with Low Line Voltage may be overridden
by pressing "F9" to enter the RBSU and enabling the "Power Supply Override"
setting under "Advanced Options".
AH270A
QuickSpecs
HP ProLiant DL785 Generation 5
Core Options
DA - 13046 Worldwide QuickSpecs — Version 30 — 1/10/2011 Page 20