QuickSpecs

HP Smart Array P400 Battery Attach Kit
NOTE: This option kit contains a 24" battery cable and adhesive material for
installing a battery into the server if a Smart Array E500 is integrated outside of
the factory if the BBWC is not pre-installed from the factory. For all solutions,
please refer to the server QuickSpecs and User's Manual for detailed
installation instructions.
417836-B21
HP 512MB w/Battery Smart Array Battery Back Write Cache Enabler
NOTE: For Smart Array P400 Controller only.
NOTE: If you install the 512MB DDR BBWC as an upgrade to a Smart Array
P400/256MB Controller, you must also order part 417836-B21 (HP SA-P400
and SA-E500 24 In Battery Cable Kit).
405148-B21
HP Smart Array Cache Battery Kit
NOTE: For Smart Array P400 Controller only.
NOTE: If you install the Battery-backed write cache as an upgrade to a Smart
Array P400/256MB Controller, you must also order part 417836-B21 (HP SA-
P400 and SA-E500 24 In Battery Cable Kit).
383280-B21
HP 256MB P-series Cache Upgrade
NOTE: Supported on HP Smart Array P212 Controller only.
462968-B21
HP 512MB P-Series Battery Backed Write Cache Upgrade 462967-B21
HP 650 mAh P-Series Battery
NOTE: Option kit not supported for factory integration.
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410
Controller, and HP Smart Array P411 Controller only.
462969-B21
HP 512MB Flash Backed Write Cache
NOTE: Option kit not supported for factory integration.
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array
P411 Controller only.
534916-B21
HP 1GB Flash Backed Cache
NOTE: Option kit not supported for factory integration.
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array
P411 Controller only.
534562-B21
HP DL785 Smart Array Controller cable option kit
NOTE: Option kit not supported for factory integration
NOTE: Supports internal connection of Smart Array P410 and P812
Controllers. Provides (2) cables to connect the Controller to the Optional SAS
Backplane (HP DL785 G5 SAS Option Kit - AH267A). This is required each
time one of the Smart Array P410 and P812 Controllers is ordered without
factory integration and will be used to control internal drives 9-16.
AM436A
SAS Controller Options
HP DL785 SAS Expander cable option kit
NOTE: Option kit not supported for factory integration
NOTE: Required each time the 468406-B21 HP SAS Expander card is
ordered.
Provides (6) cables to connect the Smart Array Controller to the Expander,
and the Expander to the Primary and Optional SAS backplanes. The SAS
cables provided with the DL785 and the Expander are not used.
AM440A
HP DL785 G5 SAS Option Kit
NOTE: The SAS Option Kit enables the second drive cage to support an
additional eight SFF SAS hard disk drives, for a total internal support of
sixteen SFF SAS hard disk drives.
AH267A
QuickSpecs
HP ProLiant DL785 Generation 5
Additional Options
DA - 13046 Worldwide QuickSpecs — Version 30 — 1/10/2011 Page 24