QuickSpecs

http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html
(Worldwide)
NOTE: For additional information on HP Power Distribution Units including
accessories please go to: www.hp.com/go/pdu .
NOTE: Please see the UPS and PDU cable matrix's on the HP Power
Protection and Management page. Under Power Cords, click on the "HP Power
Cord Matrix" link. That link will list cable descriptions, requirements, and
specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords .
HP Rack Series HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
10642 G2 (42U) Rack Cabinet - Pallet AF001A
10642 G2 (42U) Rack Cabinet - Shock Pallet AF002A
HP 10642G2 1200mm deep Rack cabinet Shock Rack AF092A
HP 10647G2 1200mm deep Rack cabinet Shock Rack AF094A
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: http://www.hp.com/go/rackandpower .
NOTE: The increasing power of new high-performance processor technology
requires increased cooling efficiency for rack-mounted servers. The 10000 G2
Series Racks provide enhanced airflow for maximum cooling, allowing these
racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the
equipment: Front and rear doors: If your 42U server rack includes closing front
and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the
required 64 percent open area for ventilation). Side: The clearance between the
installed rack component and the side panels of the rack must be a minimum of
2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-
spaces in the rack. This arrangement ensures proper airflow. Using a rack
without blanking panels results in improper cooling that can lead to thermal
damage.
NOTE: Quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP
series), with an adjustment range of 24" - 36". The ambidextrous cable
management arm can be mounted on either the left or right side for improved
cable management.
HP Rack Options Keyboards and Monitors
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor AZ870A
HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor AZ871A
HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor AZ872A
HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor AZ873A
QuickSpecs
HP ProLiant DL785 Generation 5
Additional Options
DA - 13046 Worldwide QuickSpecs — Version 30 — 1/10/2011 Page 30