HP LP2480zx LCD Monitor User Guide
© 2008 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies.
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
iv About This Guide
Table of contents 1 Product Features HP LP2480zx Model ............................................................................................................................. 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 4 Maintenance Guidelines .......................................................................................................................
Sleep Timer Mode .............................................................................................................................. 30 Recommended Options ...................................................................................................................... 31 Appendix A Advanced Color Management Features and Usage Color Gamut and Color Space Coverage ........................................................................................... 33 Color Space Emulation .............
1 Product Features HP LP2480zx Model The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT) panel.
2 ● OSD warning and reminder messages when the monitor needs to be recalibrated ● All controls supported over DDC/CI and USB for maximum flexibility and support for both Windows and Linux ● Updatable 12-bit pre-LUT, 3x3 matrix, and post-LUT for maximum flexibility ● HP Display Assistant software (Windows) to support easy set up of the monitor ● HP Display Assistant software support for Asset Management to help IT managers and Theft Deterrence to help reduce unauthorized relocation of the monitor
● On-Screen Display (OSD) adjustments in several languages for ease of setup and screen optimization ● Software and documentation CD that includes HP Display Assistant software, monitor driver software, and product documentation ● Energy saver feature to meet requirements for reduced power consumption ● Compliant with the following regulated specifications: ◦ European Union CE Directives ◦ Swedish MPR II 1990 ◦ Swedish TCO Requirements HP LP2480zx Model 3
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 50 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature.
WARNING! If an LCD monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the LCD monitor. • Only using furniture that can safely support the LCD monitor. • Ensuring the LCD monitor is not overhanging the edge of the supporting furniture.
Cleaning the Monitor 1. Turn off the monitor and the computer. 2. Unplug the monitor from the wall outlet. 3. Clean the monitor plastics with a clean cloth dampened with water. 4. Clean the monitor screen with an antistatic screen cleaner. CAUTION: Do not use benzene, thinner, ammonia, or any other volatile substances to clean the monitor or the screen. These chemicals may damage the cabinet finish as well as the screen. Shipping the Monitor Keep the original packing box in a storage area.
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor.
NOTE: Be sure the pedestal base is securely locked before continuing with the setup. Rear Components Figure 3-2 Rear Components Table 3-1 HP LP2480zx Rear Components 8 Component Function 1 USB Downstream Connectors (side panel) Connects optional USB devices to the monitor. 2 Cable Lock Provision Provides slot for use with cable security locks. 3 DisplayPort Connector Connects the DisplayPort signal cable to the monitor. 4 HDMI Connector Connects the HDMI signal cable to the monitor.
Selecting and Connecting the Signal Cables The monitor features two DVI-I connectors capable of supporting either analog or digital input, one DisplayPort connector, one HDMI connector, one set of Component connectors, one S-Video connector, and one Composite connector. The monitor will automatically select an active signal on the DVI, HDMI, and DisplayPort inputs. The Component, S-Video, and Composite inputs must be selected manually.
Table 3-2 Signal Connectors and Cables (continued) Input Monitor Connector and Cable Plug Connection Description S-Video Connect an S-Video cable to the S-Video connector on the monitor and the S-Video connector on the input device for analog operation. Cable purchased separately. Composite Connect a Composite cable to the Composite connector on the monitor and the Composite connector on the input device for analog operation. Cable purchased separately.
Connecting the Monitor Power 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect one end of the power cable to the AC power connector on the back of the monitor (1), and the other end to an electrical wall outlet (2). Figure 3-4 Connecting the Power Cable WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Connecting USB Devices The monitor provides four USB connectors on the side panel that can be used to connect devices such as a digital camera, USB keyboard, or USB mouse. 1. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. 2. Connect the USB devices to the USB downstream connectors on the side panel of the monitor. Figure 3-5 Connecting USB Devices Adjusting the Monitor 1.
2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-7 Swiveling the Monitor 3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. WARNING! A lock-down/release button on the front of the column prevents the display panel from sliding up when the monitor is lifted. If the display panel is locked in the lowest height position: a. Make sure that the monitor is safely positioned on a stable surface. b.
4. Pivot the monitor clockwise from landscape to portrait orientation viewing to adapt to your application. CAUTION: USB cables that are connected to the monitor can be damaged if they come in contact with the desk or table top surface when rotating the display panel to the portrait position. Ensure that there is enough clearance for the USB cables as you rotate the monitor. Be sure to remove any cables from the cable management opening before pivoting the monitor.
Using the Accessory Rails The monitor features accessory rails on the rear that may be used to mount optional devices, such as the HP speaker bar, to the LCD monitor. Refer to the documentation included with the optional device for detailed mounting instructions. Figure 3-10 Using the Accessory Rails Feature Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture.
3. Pull up on the monitor display panel (2) to remove it from the base. Figure 3-11 Removing the Monitor from the Pedestal Base Mounting the Monitor The HP Quick Release can be removed from the pedestal base and installed on a mounting fixture. It allows you to quickly and securely attach the monitor panel to the mounting fixture. 1. Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base on page 15 in the previous section.
2. Remove the Quick Release from the pedestal base by removing the four screws. Figure 3-12 Removing the HP Quick Release from the Pedestal Base 3. Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed from the Quick Release in the previous step. Figure 3-13 Installing the Quick Release CAUTION: The Quick Release can also be installed directly to a wall to mount the monitor panel. It is designed to support a maximum of up to 10.9 kg (24 lbs).
4. Insert the monitor panel into the Quick Release, and then press down firmly on the monitor to lock it in place. When the Quick Release locks, it will make a clicking sound. Figure 3-14 Inserting the Monitor Panel into the Quick Release Locating the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear of the monitor display panel.
4 Operating the Monitor Software and Utilities The CD that comes with the monitor contains files you can install on the computer: ● an .INF (Information) file ● .ICM (Image Color Matching) files ● auto-adjustment pattern utility ● HP Display Assistant software PDF Complete is supplied on this CD and can be installed from the menu. NOTE: If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP monitors support Web site.
Installing the .INF and .ICM Files After you determine that you need to update, you can install the .INF and .ICM files from the CD or download them. Installing from the CD To install the .INF and .ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive. The CD menu is displayed. 2. View the Monitor Driver Software Readme file. 3. Select Install Monitor Driver Software. 4. Follow the on-screen instructions. 5.
Using the Auto-Adjustment Function You can optimize the screen performance for VGA (analog) input by using the - (Minus) button on the monitor and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if the monitor is using a DVI-D, HDMI, or DisplayPort input.
Front Panel Controls Table 4-1 Monitor Front Panel Controls Control Function 1 Function Performs the function set in the OSD menu (OSD Control > Function Control). 2 Input Selects the video input (DVI-1, DVI-2, HDMI, DisplayPort, Component, S-Video, or Composite). 3 + (Plus) Navigates forward through the OSD menu and increases adjustment levels. 4 – (Minus) ● Navigates backward through the OSD menu and decreases adjustment levels.
Adjusting the Monitor Settings The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display Assistant software. NOTE: If you are having a problem with the monitor settings, select the Factory Reset option in the OSD menu to see if that solves the problem before adjusting other settings in the OSD menu. The Factory Reset function returns all OSD menu settings and DDC/CI controls to the factory default settings, except the language.
OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: ● Cancel—to return to the previous menu level. ● Save and Return—to save all changes and return to the OSD Main Menu screen. This Save and Return option is only active if you change a menu item. ● Reset—to change back to the previous setting.
Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description ● Fill to Screen—image fills the entire screen and may look distorted or elongated because of non-proportional scaling of height and width ● Fill to Aspect Ratio—image is sized to fit the screen and maintains proportional image ● One-to-one—disables video scaling, displays an image that is smaller in size than the monitor’s capability and centers the image on the screen in the active viewing area ● Overscan—enables over-scanning of
Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description Language Selects the language in which the OSD menu is displayed. The factory default is English. Management Selects the power management features of the monitor. Power Saver Enables the power saving feature. Select: ● On ● Off The factory default is On. Power On Recall Restores power to the monitor following an unexpected removal of power. Select: ● On ● Off The factory default is On.
Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description Horizontal OSD Position Changes the viewing position of the OSD menu to the left or right area of the screen. The factory default range is 50. Vertical OSD Position Changes the viewing position of the OSD menu to the top or bottom area of the screen. The factory default range is 50. Function Control Selects the operation of the front panel Function button.
Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description Recommended Settings Provides the recommended resolution mode and refresh rate for the monitor. Serial Number Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. Version Reports the firmware version of the monitor. Last Calibration Displays the number of backlight hours since the last calibration. Backlight hours Reports the total hours of backlight operation.
● Defined preset display settings for each individual user in a multi-user environment. ● Asset Management and Power Management capabilities that include remote control for individual or a group of displays on the domain from a centralized console application. ● Theft deterrence to help reduce unauthorized relocation of the monitor. NOTE: Refer to the HP Display Assistant software user guide for additional information about the software.
● Scanning Inputs. Please Wait—Indicates the monitor is in the process of scanning the DVI (analog and digital), DisplayPort, and HDMI inputs. ● Color Gamut Remapping Enabled—Indicates the color gamut remapping has been enabled because the monitor video input or video signal changed from YUV to an RGB signal. ● Color Gamut Remapping Disabled—Indicates the color gamut remapping has been disabled because the monitor video input or video signal changed from RGB to a YUV signal.
13. Set the Timer mode to On to activate the Sleep Timer settings. 14. When you are finished, select Save and Return to exit the menu. The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed. Recommended Options For Microsoft Windows and Macintosh users, HP recommends purchasing the HP/X-Rite color calibration kit.
A Advanced Color Management Features and Usage The HP LP2480zx monitor provides several advanced features that make it particularly well-suited to color-critical applications, such as professional computer graphics development, video production, and similar uses. These include: ● True 10-bit drivers in the LCD panel itself, and the ability to support true 10 bits/color (30 bits/pixel) video through the DisplayPort 1.1 and HDMI 1.3 inputs.
Color Gamut and Color Space Coverage The LP2480zx monitor uses an LED-backlit LCD module that provides an extremely wide color gamut. This gamut was chosen to enclose a number of color spaces as defined by various standard output device specifications, which (along with other color-management features in this product’s electronics) permits the monitor to accurately emulate display devices conforming to these standards.
As plotted within the 1976 CIE u’v’ color space, these gamuts are shown below: Figure A-1 Color Space Diagram Color Space Emulation As noted earlier, the LP2480zx has the capability of emulating a display that conforms to a number of standard output device specifications, such as sRGB, Adobe RGB, and et cetera. This emulation includes matching the specified primaries, transfer function (gamma), white point, and, where appropriate, white level (luminance) of the target specification.
each of the three channels (that is, exactly what will be output, in terms of light, for the given values of red, green, and blue). This may be expressed by the following diagram: Figure A-2 Model of Standard Display Device Here, the input RGB values are first modified by the appropriate transfer function (γR, γG, or γB); this operation may be viewed as being performed by three look-up tables (LUTs) of the appropriate width and depth.
Figure A-4 Correcting Native Display Characteristics It can be shown that the required transform (T) may be implemented as a pair of appropriately-sized look-up tables (LUTs), on either side of a 3 x 3 matrix multiplication. The LUT preceding the matrix multiplication (the “pre-LUT”) implements the desired standard transfer function or gamma response curve, such that input values are correctly mapped per that standard into a “linear light” space.
Note that since the look-up tables for the three channels (R, G, and B) are independent, differences in the display device’s transfer function across these three, along with any minor errors in the display white point, may be “nulled out” using the look-up tables, in addition to the operations required for the color space emulation as described above.
Table A-2 Supported Signal Inputs and Color Space Matrix (continued) Input used Color encoding Scan format Result Component, CVBS, S-Video YUV (RGB not supported) Either Color Space presets: disabled Hue/Saturation controls: enabled 10 bits/color LCD Module As noted earlier, the LCD module in the LP2480zx monitor provides a 10 bits/color (30 bits/pixel) input, with true 10-bit drivers within the LCD itself.
brightness settings, both its white luminance and black level compare favorably with those of traditional CRT displays. (At the low end of this range, the monitor’s black level will typically be approximately 0.05 cd/m2.) As with several other parameters set in the color space presets, the programming of the backlight controller is managed either through the LP2480zx’s on-screen display (OSD), or by using the HP Display Assistant software.
Figure A-7 Low Linear Region Response Curve A generalized model for the display response curve accommodating the addition of a linear section as shown above thus requires the specification of four parameters in addition to the “gamma” exponent value: For input values (I) ≤ A0: Y = I/A1 For input values (I) > A0′ Y = [(I + A2)/(1 + A3)]γ The response of the LP2480zx is automatically set to the correct standard as part of the color-space selection, using either the on-screen display (OSD) or using the HP Dis
Table A-3 Response Curve Constants for Various Color Spaces (continued) Color space A0 A1 A2 A3 gamma (γ) Full 0 1 0 0 2.2* * Note that in “full gamut” mode, the color space emulation capabilities of the LP2480zx monitor are used to correct any deviations in the LCD’s native performance from its nominal specified values. The color gamut, white point, and response curve seen in this mode are therefore those of the LCD panel itself, but corrected to their nominal values as accurately as possible.
B Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power button on front panel of the monitor is turned off. Press the front panel power button. NOTE: If pressing the power button has no effect, press and hold the power button for 10 seconds to disable the power button lockout feature.
Using the Worldwide Web For the online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support Preparing to Call Technical Support If you cannot solve a problem using the trouble shooting tips in this section, you may need to call technical support.
C Technical Specifications NOTE: All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher or lower.
Table C-1 HP LP2480zx Model Specifications (continued) Power Source 90 — 265 VAC, 45–63 Hz Altitude: Operating 0 to 3657.
Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. Table C-2 LP2480zx Model Factory Preset Display Modes Preset Pixel Format Horz Freq (kHz) Horz Polarity Vert Freq (Hz) Vert Polarity Pixel Clk (MHz) Source 1 640 × 480 31.47 – 59.94 – 25.175 VGA 2 640 × 480 37.50 – 75.00 – 31.
Table C-3 LP2480zx Model High Definition Video Formats Preset Timing Name Pixel Format Horz Freq (kHz) Vert Freq (kHz) Pixel Rate (MHz) OSD Display 1 480i 720 x 480 15.734 60 13.5 480i 2 480p 720 x 480 31.469 60 27 480p 3 720p60 1280 x 720 45 60 74.25 720p-60Hz 4 1080i60 1920 x 1080 33.75 60 74.25 1080i-60Hz 5 576i 720 x 576 15.625 50 13.5 576i 6 576p 720 x 576 31.25 50 27 576p 7 720p50 1280 x 720 37.5 50 74.25 720p-50Hz 8 1080i50 1920 x 1080 28.
D Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany German Ergonomics Notice HP products which bear the “GS” approval mark, when forming part of a system comprising HP brand computers, keyboards and monitors that bear the “GS” approval mark, meet the applicable ergonomic requirements. The installation guides included with the products provide configuration information.
CAUTION: Do not use the power cord received with this product on any other products. Product Environmental Notices Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA) http://www.eiae.org.
11363-2006 11363-2006 52 Appendix D Agency Regulatory Notices
E LCD Monitor Quality and Pixel Policy The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD. These imperfections are caused by one or more defective pixels or sub-pixels.