Implementing Out-Of-Band PC Management with DASH on HP Business Systems with AMD Chipset

7
Also, please always make sure you use “Notepad” to open and save config.xml while setting private account and password.
HP works closely with management console vendors and partners to ensure that an ecosystem of supporting products is
available to help you realize the full potential of DASH in your environment.
Some of the different consoles and software available today are list below. For more details, please visit the vendor
website.
• AMD DASH Plug-in for Microsoft Systems Center 2007
•
Realtek Management Console
•
AMD Management
For systems with Broadcom Ethernet network please refer to the support link at the end of this document.
HP Client Management Web View
In addition to managing the DASH-enabled PC through a management console, HP provides a convenient method to access
out-of-band management functions through a web browser.
The HP Client management Web View is a web browser-based interface for limited remote system management. The web
view is only functional once the management controller has been provisioned for DASH management and an Administrator
account has been enabled. The HP Client management Web View is accessible using any modern browser.
Management functions accessible from the web-based user interface include:
• Access to hardware inventory information for system, processors, and memory
•
Visibility to system power state and remote power control operations
•
Network configuration settings
The following steps outline connecting to the out-of-band management service from the embedded web server included on
the Realtek Ethernet controller. This interface provides an alternative control mechanism for utilizing the DASH functionality
without requiring a DASH enabled management console.
1. Make sure your system has minimum supported BIOS/FW/Driver from Table 1 and Table 2 above