HP Notebook (Intel) HP 240 G4 Notebook HP 246 G4 Notebook HP Notebook 14g HP Notebook 14q - Maintenance and Service Guide

●
WLAN module (see WLAN module on page 41)
●
Memory module (see Memory module on page 43)
To remove the system board:
1. Remove the display and antenna cables by disconnecting the display cable from the system board (1).
2. Disconnect the antenna cable from the WLAN module (2).
3. (Touch models only) Disconnect the touch cable from the system board (3).
4. Remove the cables from the clips in the middle of the computer (4).
5. Remove the cable from the clips near the battery bay (5).
6. Remove the tape that secures the cables to the computer (6), and then remove the cables from their
remaining routing paths.
Component replacement procedures 57