AHCI and RAID on HP Compaq Elite 8000, 8100, and 8200 Business PCs

RAID migrations using Intel Rapid Storage Console

Migration to RAID 1 from two non-RAID hard drives

NOTE

HP Elite 8000-series Business PC products only support

RAID based on two identical SATA hard drives in either

RAID 0 or RAID 1 or Matrix RAID Mode of RAID 0 and

R A I D 1.

NOTE

At least 6 MB of free space at the end of the drive is

required to migrate from a non-RAID to RAID configuration

or an error will occur.

1. Open the Intel Rapid Storage Console and select Create in the top pane and

select the Volume Type in the right pane. Select Real-time data

protection (RAID 1).

2. Click Next to configure the volume.

3. In the Configure window, name the volume, select the two disks, and specify if

you want to keep data from one of the selected disks.