AHCI and RAID on HP Compaq Elite 8000, 8100, and 8200 Business PCs

Migration to RAID 0 from two non-RAID hard drives

NOTE

HP Elite 8000-series Business PC products only support

RAID based on two identical SATA hard drives in either

RAID 0 or RAID 1 or Matrix RAID Mode of RAID 0 and

R A I D 1.

To migrate two non-RAID hard drives to a RAID 0 configuration using Intel Rapid

Storage Console perform the following steps:

1. Open the Intel Rapid Storage Console and select Create and select the volume

type Optimized disk performance (RAID 0).

2. Click Next to configure the volume.

3. In the Configure window, name the volume, select the two disks and specify if

you want to keep data from one of the selected disks.

4. Click Next to begin the confirmation process and start the Create Volume

action.

5. Click Create Volume to confirm you understand the Volume Creation

warning and you want to continue the action.

6. Click OK after the action completes.