AHCI and RAID on HP Compaq Elite 8000, 8100, and 8200 Business PCs

31
NOTE
The first array volume creation is the place for adjusting
the size; the second volume will take any remaining
space.
19. While creating the second RAID volume, click Next to open the completion
window.
20. Select Finish to start the migration process, which can take a few hours. The
following screen appears.
You can see the state of the Matrix RAID Mode created by opening the Intel Rapid
Storage Console and clicking View > Advanced Mode. The Matrix RAID Mode of
three hard drives is illustrated in the following image.
Migration to Matrix RAID 1 and RAID 0 from two non-RAID hard
drives
The migration process for two hard drives to RAID Matrix Mode (0 + 1) is very
similar to the process described in the section about migration of three hard drives
to matrix mode RAID (0 + 5). The difference in the process is selecting two hard
drives as part of the volume created and selecting RAID 5 instead of RAID 1.