AHCI and RAID on HP Compaq Elite 8000, 8100, and 8200 Business PCs

1. Run the Intel Rapid Storage Console application on the system experiencing a

degradation to identify the hard drive that failed and to which port it is

connected.

2. After identifying the hard drive, close all applications, shut down the operating

system, power down the unit, unplug the power cord, and replace the defective

hard drive.

3. After replacing the hard drive, automatic rebuild of the redundancy begins

immediately after the system is powered up and operating system starts. The

following message appears:

is subject to change without notice. The only warranties for HP products and services

are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP

shall not be liable for technical or editorial errors or omissions contained herein. Intel is

a trademark of Intel Corporation in the U.S. and other countries. Microsoft and

Windows are U.S. registered trademarks of Microsoft Corporation. Microsoft and

Windows are U.S. registered trademarks of Microsoft Corporation.

652391-001, March 2011