Intel vPro Processor Technology Setup and Configuration for the HP 8200 Business PC

16
b. IPV4 Address. Enter a specific address, making sure all AMT systems have
a unique static IP address. Multiple systems sharing the same IP address
can lead to network collisions, which will cause the systems to not respond
correctly
Default setting: 0.0.0.0
Recommended setting: (Network dependent)
Example
c. Subnet Mask. Enter the subnet mask.
: 19 2.16 8 . 0 .1
Default setting: 255.255.255.0
Recommended setting
d. Default Gateway Address. If this option is not needed then press Enter to
use the default value.
: (Network dependent)
Default setting: 0.0.0.0
Recommended setting
e. Preferred DNS Address. If this option is not needed then press Enter to use
the default value.
: (Network dependent)
Default setting: 0.0.0.0
Recommended setting
f. Alternate DNS value. If this option is not needed then press Enter to use the
default value.
: (Network dependent)
Default setting: 0.0.0.0
Recommended setting
g. Wired IPV6 Configuration (Figure 16) .
Select Enabled option for IPv6 Feature Selection.
: (Network dependent)
Default value: Disabled
Recommended setting: (Network dependent)
Figure 16. Intel AMT Wired LAN IPV6 Configuration Settings Screen