Intel vPro Processor Technology Setup and Configuration for the HP 8200 Business PC

Select Enabled option for IPv6 Feature Selection

Default setting: Disabled

Recommended setting

To create a profile for the AMT Intel WLAN using the WEB GUI

application, use the following steps:

: (Network dependent)

IPv6 interface type:

RANDOM ID (default) - The IPv6 Interface ID is automatically generated

using a random number as described in RFC 3041.

Intel ID - The IPv6 Interface ID is automatically generated using the MAC

address.

Manual ID - The IPv6 Interface ID is configured manually. Selecting this

type requires that the Manual Interface ID is set with a valid value.

The Intel Wireless AMT feature only supports on the Compaq 8200 Elite

Ultra Slim Desktop and All-in-One (AiO) platforms with the Intel mini PCI

express wireless LAN card. Intel AMT only supports DHCP and does not

support static IP addresses. Wire and wireless cannot be on the subnet

concurrently. A wireless profile must be created from the remote console

after connecting to the AMT client machine using the wired LAN.

i. Connect to the AMT client system using the wired LAN and WEB GUI.

Select the Wireless Settings option to configure the wireless power

policy (On in all power states S0, S3, S4, and S5).

ii. Select Wireless Settings to configure the wireless power policy (Figure

18 ) .

Figure 18. Intel AMT Wireless Settings screen