Intel vPro Processor Technology Setup and Configuration for the HP 8200 Business PC

26
8. Go into Intel AMT Configuration (Figure 25).
Figure 25. Intel AMT Configuration screen.
9. Select Manageability Feature Selection.
Default (and recommended) setting
10. Select SOL/IDE-R/KVM.
: Enabled
a. Username and password. This option allows users and passwords to be
added from the WebGUI. If it is disabled, then only the administrator has
MEBx remote access.
Default (and recommended) setting
b. Serial Over LAN (SOL).
: Enabled
Default (and recommended) setting
c. IDE Redirection.
: Enabled
Default (and recommended) setting
d. Legacy Redirection Mode. This option allows the Redirection feature to
work with the pre-AMT 7.0 remote consoles (need to set to Enabled).
: Enabled
Default (and recommended) setting
e. KVM.
: Disabled
Default (and recommended) setting
11. Select User Consent
: Enabled
a. User opt-in.
Default setting: User Consent is required for KVM session
Recommended setting
b. Opt-in Configuration from remote IT.
Disable Remote Control of KVM Opt-in Policy – This option disables the
Remote User’s ability to select User OPT-IN Policy. In this case only the
local user can control the opt-in policy. Enable Remote Control of KVM
Opt-in Policy - Enables Remote User’s ability to select User OPT-IN Policy.
: User dependent
Default setting: Enabled Remote Control of KVM Opt-in Policy
Recommended setting: (User dependent)