Intel vPro Processor Technology Setup and Configuration for the HP 8200 Business PC

27
12. Select Password policy. This option will determine if the local MEBx password
can be modified from a remote console.
Default (and recommended) setting: Default Password Only
Option Effect
13. Select Network Setup. Enter a Host Name (spaces are not accepted).
Default Password Only This option will allow the MEBx password
to be remotely modified only if it is the
default “admin” password.
During Setup and Configuration This option will allow the MEBx password
to be remotely modified only during
Setup and Configuration of the AMT
platform.
Anytime This option will allow the MEBx password
to be remotely modified at any time.
Default setting: (None)
Recommended setting
14. In the Network Setup menu, select TCP/IP.
: (User dependent)
a. Wired LAN IPv4 Configuration.
DHCP Mode
Default setting: DHCP Enabled
Recommended setting
b. Wired LAN IPv6 Configuration.
: (User dependent. For the purposes of this paper,
DHCP is enabled.)
Default setting: Disabled
Recommended setting
i. IPv6 interface ID Type.
RANDOM ID (default) - The IPv6 Interface ID is automatically
generated using a random number as described in RFC 3041.
Intel ID - The IPv6 Interface ID is automatically generated using the
MAC address.
Manual ID - The IPv6 Interface ID is configured manually. Selecting
this type requires that the Manual Interface ID is set with a valid value.
: (User dependent. For the purposes of this paper,
DHCP is enabled.)
ii. IPv6 Address. Enter a static IPv6 faddress.
Default setting: (None)
Recommended setting: (Network dependent)
Example
iii. IPv6 Default Router. Enter the IPv6 default router address.
: 2001:db8::1428:57ab
Default setting: (None)
Recommended setting: (Network dependent)
Example: 2001:db8::1428:57ab