Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

7. Replace the four screws in the bottom of the carrier to hold the drive securely in place.
Figure 6-36 Replacing the Security Screws
8. Place the thermal sensor on top of the hard drive in a position that does not cover the label (1)
and attach the thermal sensor to the top of the hard drive with the adhesive strip (2).
Figure 6-37 Replacing the Thermal Sensor
104 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis