Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

5. Remove the screw that secures the assembly to the front of the chassis.
6. Rotate the right side of the assembly away from the chassis.
Figure 6-40 Removing the front I/O, USB, power switch assembly
7. Pull the assembly toward the right and away from the chassis while threading the wires through
the slot between the drive cage and chassis front and the hole in the front of the chassis.
To reinstall the assembly, reverse the removal procedure.
108 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis