Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

Speaker
Description Spare part number
Speaker 645330-001
The speaker is mounted to the inside front of the chassis with two screws.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 73).
2. Remove the computer access panel (
Computer Access Panel on page 74).
3. Disconnect the speaker wire from the white system board connector labeled SPKR (1).
4. From the inside of the unit, remove the two screws (2) that secure the speaker to the front of the
chassis.
5. Rotate the top of the speaker downward slightly, and then remove it from the chassis (3).
Figure 6-42 Removing the speaker
To install the speaker, reverse the removal procedures.
110 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis