Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

Front Fan Assembly
Description Spare part number
Front fan 645327-001
The front fan assembly is attached to the front of the chassis.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 165).
2. Remove the access panel (
Access Panel on page 166).
3. Remove the front bezel (
Front Bezel on page 167).
4. Remove the baffle (
Fan duct on page 189).
5. Disconnect the fan cable from the red/brown system board connector labeled CHFAN1.
Figure 8-28 Disconnecting the front fan cable
6. Press the tabs that secure the fan assembly to the front of the chassis (1).
190 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis