Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

Rear Fan
Description Spare part number
Rear fan 605155-001
The rear fan is secured to the rear right corner of the chassis. You must remove the system board
before you can remove the rear fan.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 206).
2. Remove the computer access panel (
Access Panel on page 207).
3. Remove the optical drive (
Removing the Optical Drive on page 216).
4. Remove the front fan (
Front Fan on page 215).
5. Remove the hard drive (
Hard Drive on page 219).
6. Remove the optical drive rail (
Optical Drive Rail on page 223).
7. Remove the heat sink (
Heat sink on page 227).
8. Remove the system board (
System Board on page 234).
9. From the outside of the chassis, remove the four Phillips screws that secure the fan to the
chassis.
Figure 9-32 Removing the rear fan screws
236 Chapter 9 Removal and Replacement Procedures – Ultra-Slim Desktop (USDT) Chassis