HP EliteBook 725 G2 Notebook PC Maintenance and Service Guide

5 Removal and replacement procedures for
Customer Self-Repair parts
NOTE: The Customer Self-Repair program is not available in all locations. Installing a part not supported by
the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
NOTE: Please read and follow the procedures described here to access and replace Customer Self-Repair
parts successfully.
NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See Locating the serial number, product number, and
model number on page 18 for details.
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are as many as 15 screws that must be removed, replaced, and/or loosened when servicing the
computer. Make special note of each screw size and location during removal and replacement.
Service cover
NOTE: The service cover spare part kit includes rubber feet.
Description Spare part number
Service cover 766018-001
Before removing the disassembling the computer, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the service cover:
1. Turn the computer upside down, with the rear toward you.
2. Slide the service cover release latch (1) to gain access to the service cover security screw.
3. Remove the Phillips PM2.0×4.5 security screw (2) (if present).
NOTE: The service cover includes a threaded receptacle for storing the security screw.
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts