HP ProBook 440 G1 Notebook PC Maintenance and Service Guide

Processor

NOTE: All processor spare part kits include replacement thermal material.

Description Spare part number

Intel Core i7-4702MQ, 2.2-GHz processor with 6-MB L3 cache 723522-001

Intel Core i5-4200M, 2.5-GHz processor with 3-MB L3 cache 737328-001

Intel Core i3-4000M, 2.4-GHz processor with 3-MB L3 cache 737327-001

Intel Pentium 3550M, 2.4-GHz, with 2-MB L3 cache 737329-001

Intel Celeron 2950M, 2.1-GHz, with 2-MB L3 cache 737326-001

Before removing the processor, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 37).

5. Remove the following components:

a. Service door (see

Service door on page 38).

b. Hard drive (see

Hard drive on page 39)

c. Optical drive (see

Optical drive on page 42)

d. WLAN/Bluetooth module (see

WLAN/Bluetooth combo card on page 46)

e. WWAN module (see

WWAN module on page 48)

f. Keyboard (see

Keyboard on page 50)

g. Top cover (see

Top cover on page 54)

h. System board (see

System board on page 68)

i. Fan/heat sink assembly (see

Fan/heat sink assembly on page 74)

Remove the processor:

1. Position the system board upside-down.

2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn

counterclockwise until you hear a click.

Component replacement procedures