Specifications

3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 34), and then remove the following components:
a. Service door (see
Service door on page 35)
b. Hard drive (see
Hard drive on page 36)
c. Optical drive (see
Optical drive on page 39)
d. WLAN module (see
WLAN module on page 43)
e. Keyboard (see
Keyboard on page 46)
f. Top cover (see
Top cover on page 49)
g. System board (see
System board on page 56)
h. Power connector cable (see
Power connector cable on page 65)
Remove the display assembly:
1. Release the wireless antenna cables (1) from the clips (2) built into the right speaker.
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other
computer components.
2. Remove the three Phillips M2.5×6.5 screws (1) that secure the display assembly to
the base enclosure.
Component replacement procedures 69