Specifications

3. Remove the display assembly (2).
4. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Remove the two display bezel screw covers (1) and the two Phillips M2.5×5.0 screws (2)
that secure the display bezel to the display assembly.
b. Flex the inside edges of the bottom edge (3), the left and right sides (4),
and the top edge (5) of the display bezel until the bezel disengages from
the display enclosure.
c. Remove the display bezel (6).
CAUTION: Be sure the work surface is clear of all tools, screws, and computer components
before turning the display panel upside down on the work surface.
70 Chapter 4 Removal and replacement procedures