Manual

The Power button and Resume button.
●
The following table provides information on the buttons' different light patterns.
Table 2-2 Power button and Resume button
Light description/Light pattern
Explanation and recommended action
The Power light and the Resume light blink.
One of the following problems might have occurred.
1. Print media is jammed in the printer.
●
Locate and clear the jam. For more information, see
Clear paper jams.
Press the
(Resume) button to continue printing.
2. The printer carriage has stalled.
●
Open the ink cartridge access door and remove any obstructions (such as jammed
paper).
●
Press the
(Resume) button to continue printing.
●
If the error persists, turn the printer off, and then on again.
To cancel the print job, press the
(Cancel) button.
The Power light is on and the Resume light blinks.
One of the following problems might have occurred.
1. The printer is out of paper.
●
Load paper and press the
(Resume) button to continue printing.
2. There is a paper mismatch.
This occurs when paper loaded in the input tray does not match the paper size setting on the
printer control panel, and in the printer driver or on your mobile device.
Do one of these:
●
Change the paper.
8 Chapter 2 Get started ENWW