Manual

Table 2-3 Power button and ink cartridge lights (continued)
Light description/Light pattern
Explanation and recommended action
One or more of the ink cartridges are low on ink.
NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you
receive a low-ink warning message, consider having a replacement cartridge available to avoid
possible printing delays. You do not need to replace the cartridges until print quality becomes
unacceptable.
The Power light is on, one or more of the ink cartridge lights are on, and the Resume light blinks.
One of the following might occur. Refer to the help message in the HP printer software for more
information.
1. One or more of the ink cartridges are very low on ink.
Press the
(Resume) button to continue using the existing cartridges.
NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When
you receive a low-ink warning message, consider having a replacement cartridge available to
avoid possible printing delays. You do not need to replace the cartridges until print quality
becomes unacceptable.
2. One or more of the ink cartridges are counterfeit or not new.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or
repairs required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased Original HP ink cartridges, go to
www.hp.com/go/anticounterfeit.
3. A supply secure upgrade is detected.
Press the
(Resume) button to upgrade the printer supply. If the Resume light turns off and
one or more of the ink cartridge lights blink after the upgrade, the upgrade was not successful.
The Power light, the Resume light, and all of the ink cartridge lights blink.
A non-recoverable error has occurred. Unplug the power cord, and then plug the power cord back
in, and try printing.
ENWW Use the printer control panel 11