Manual

Table 2-7 Paper Size Selection button and lights (continued)
Light description/Light pattern
Explanation and recommended action
●
If you press the button once when the light is blinking, blinking will also stop and the light will
become solid.
For more information, see the earlier case when one of the Paper Size Selection lights is on.
All Paper Size Selection lights are off.
This occurs when you select a paper size from a software application or embedded web server
(EWS) that is not one of the sizes on the printer control panel.
Be sure to load paper that matches the paper settings you have selected, and then close the input
tray properly.
All Paper Size Selection lights are blinking.
This occurs when you pull out the input tray after selecting a paper size from a software application
or EWS that is not one of the sizes on the printer control panel.
The lights stop blinking when you close the tray or press the selection button once.
If you are loading paper of a size that is available on the control panel, use the selection button to
select the size of the paper loaded (see
Set the paper size for the printer). Otherwise, load paper
that matches the paper settings you have selected, and then close the input tray properly.
The Paper Size Selection lights are cycling or blinking in sequence one after another from top to
bottom (for about 10 seconds).
NOTE: This section is only applicable to newer versions of iOS and OS X devices.
When you connect your Apple mobile device to your printer, the paper size selection lights blink in
sequence for about 10 seconds, and then stop. The blinking lights confirm that your mobile device
is connected to the correct printer.
If you press the selection button once, the lights will stop blinking.
Paper basics
The printer is designed to work well with most types of office paper. It is best to test a variety of print
paper types before buying large quantities. Use HP paper for optimum print quality. Visit the HP
website at
www.hp.com for more information about HP paper.
16 Chapter 2 Get started ENWW