Manual

●
Load only one type of paper at a time into a tray.
●
When loading the tray, make sure the paper is loaded correctly.
●
Do not overload the tray.
●
To prevent jams, poor print quality, and other printing problems, avoid loading the following
paper in the tray:
◦
Multipart forms
◦
Media that is damaged, curled, or wrinkled
◦
Media with cutouts or perforations
◦
Media that is heavily textured, embossed, or does not accept ink well
◦
Media that is too lightweight or stretches easily
◦
Media that contains staples or clips
For more information on loading paper, see
Load paper.
Load paper
To load standard paper
1. Lift the output tray.
2. Pull out the input tray to extend it.
NOTE: To load legal-size paper, slide the grey latch (on the front left of the input tray ) to the
right, and lower the front of the tray.
ENWW Load paper 19